Product Description:
The sludge dewatering machine is clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant constrution. The sludge dehydration machine using screw and the moving rings to clean itself as clog-free sctructure, and controlled by the PLC automatically. It's a new technology that can replace the traditional filter press like belt press and fram press filter.
Feature:
1.Widely Applicantion
Suitable for dewatering of high, low thickness sludge, dispense with thickness tank and strong tank for dewatering of low thickness sludg(2000mg/L), decrease the construction cost as well as the release of phosphorus.
2.Clog-Free
Combining with bubble machine, sludge pump and dosing pump via the electric cabinet, it can operate automatically for 24 hours, unmanned. The daily maintenance is easy and save time.
5.Low Speed Running
The screw shaft speed is about 2-5 rpm, very low power, less fault, small vibration and noise, safety operation.
6.Durability
Almost the whole machine is made of stainless steel, lengthen the using life utmostly, the only parts which need to replace are screw shaft and moving ring.
Principle Structure:
Thickening:
When the shaft is driven by the screw, moving rings around the shaft move up and down relatively. Most water is pressed out from the thickening zone and fall down to the filtrate tank for gravity.
Dewatering:
The thickened sludge moves forward continuously from the thickening zone towards the dewatering zone. With the pitch of the screw shaft thread getting narrower and narrower, the pressure in the filter chamber increases higher and higher. In addition to the pressure generated by the back-pressure plate, the sludge is greatly pressed and dryer sludge cakes produce.
Self-cleaning:
The moving rings rotates continuously up and down under the pushing of the running screw shaft while the gaps between the fixed rings and moving rings are cleaned to prevent from clogging that happens frequently for traditional dewatering equipment.
Specification:
The sludge dewatering machine is clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant constrution. The sludge dehydration machine using screw and the moving rings to clean itself as clog-free sctructure, and controlled by the PLC automatically. It's a new technology that can replace the traditional filter press like belt press and fram press filter.
Feature:
1.Widely Applicantion
Suitable for dewatering of high, low thickness sludge, dispense with thickness tank and strong tank for dewatering of low thickness sludg(2000mg/L), decrease the construction cost as well as the release of phosphorus.
2.Clog-Free
With the function of self-cleaning process, as a result, the clogging any troble while separating the water from the sludge easily. In addition, there is no need to add large quality of flushing water and bearing of internal recycle.
3.Operation Easy Combining with bubble machine, sludge pump and dosing pump via the electric cabinet, it can operate automatically for 24 hours, unmanned. The daily maintenance is easy and save time.
4.Small Type Design
The dewatering machine includes electric cabinet, dosing tank. Floccunlation mixing tank and dewatering main part. The compact appearance takes small space and weight, easy on repairing, replace moving.5.Low Speed Running
The screw shaft speed is about 2-5 rpm, very low power, less fault, small vibration and noise, safety operation.
6.Durability
Almost the whole machine is made of stainless steel, lengthen the using life utmostly, the only parts which need to replace are screw shaft and moving ring.
Principle Structure:
Thickening:
When the shaft is driven by the screw, moving rings around the shaft move up and down relatively. Most water is pressed out from the thickening zone and fall down to the filtrate tank for gravity.
Dewatering:
The thickened sludge moves forward continuously from the thickening zone towards the dewatering zone. With the pitch of the screw shaft thread getting narrower and narrower, the pressure in the filter chamber increases higher and higher. In addition to the pressure generated by the back-pressure plate, the sludge is greatly pressed and dryer sludge cakes produce.
Self-cleaning:
The moving rings rotates continuously up and down under the pushing of the running screw shaft while the gaps between the fixed rings and moving rings are cleaned to prevent from clogging that happens frequently for traditional dewatering equipment.
Specification:
Model | Dry Sludge Capacity(KG/h) | Sludge Flow Rate m3/h | ||||||
Low thickness KG/h | High thickness KG/h | 2000mg/L | 5000mg/L | 10000mg/L | 20000mg/L | 25000mg/L | 50000mg/L | |
TDL131 | ~6 | ~10 | ~3.5 | ~1.4 | ~1.0 | ~0.5 | ~0.4 | ~0.2 |
TDL132 | ~12 | ~20 | ~7.0 | ~2.8 | ~2.0 | ~1.0 | ~0.8 | ~0.4 |
TDL201 | ~20 | ~30 | ~10 | ~4.0 | ~3.0 | ~1.5 | ~1.2 | ~0.6 |
TDL202 | ~38 | ~60 | ~19 | ~7.6 | ~6.0 | ~2.8 | ~2.4 | ~1.2 |
TDL203 | ~57 | ~90 | ~28 | ~11 | ~9.0 | ~4.3 | ~3.6 | ~1.8 |
TDL301 | ~40 | ~60 | ~19 | ~7.6 | ~6.0 | ~3.0 | ~2.4 | ~1.2 |
TDL302 | ~76 | ~120 | ~36 | ~15 | ~12 | ~5.8 | ~4.8 | ~2.4 |
TDL303 | ~115 | ~180 | ~56 | ~22 | ~18 | ~8.6 | ~7.0 | ~3.6 |
TDL351 | ~65 | ~100 | ~33 | ~13 | ~10 | ~5.0 | ~4.0 | ~2.0 |
TDL352 | ~125 | ~200 | ~63 | ~25 | ~20 | ~9.5 | ~8.0 | ~4.0 |
TDL353 | ~186 | ~300 | ~95 | ~37 | ~30 | ~14 | ~12 | ~6.0 |
TDL401 | ~95 | ~150 | ~48 | ~19 | ~15 | ~7.5 | ~6.0 | ~3.0 |
TDL402 | ~180 | ~300 | ~92 | ~36 | ~30 | ~14 | ~12 | ~6.0 |
TDL403 | ~280 | ~450 | ~138 | ~55 | ~45 | ~22 | ~18 | ~9.0 |
Model | Screw Size DN | Discharge Pot Height(mm) | Length (mm) |
Width(mm) | Height(mm) | Weight(KG) | Operating Weight(KG) |
TDL131 | 110 | 400 | 2400 | 750 | 1195 | 280 | 370 |
TDL132 | 110 | 400 | 2400 | 910 | 1195 | 460 | 668 |
TDL201 | 200 | 500 | 2600 | 800 | 1550 | 600 | 780 |
TDL202 | 200 | 500 | 2800 | 950 | 1650 | 1020 | 1320 |
TDL203 | 200 | 500 | 3120 | 1270 | 1780 | 1430 | 1880 |
TDL301 | 250 | 600 | 3120 | 860 | 1880 | 880 | 1220 |
TDL302 | 250 | 600 | 3220 | 1120 | 1930 | 1340 | 2280 |
TDL303 | 250 | 600 | 3540 | 1455 | 1930 | 2260 | 3330 |
TDL351 | 300 | 700 | 3460 | 950 | 1960 | 1150 | 1650 |
TDL352 | 300 | 700 | 3640 | 1260 | 2010 | 2160 | 3190 |
TDL353 | 300 | 700 | 3925 | 1630 | 2010 | 3160 | 4720 |
TDL401 | 350 | 800 | 4420 | 1180 | 2100 | 1860 | 2870 |
TDL402 | 350 | 800 | 4685 | 1360 | 2160 | 3280 | 4660 |
TDL403 | 350 | 800 | 4960 | 1780 | 2230 | 4560 | 7320 |
Model | Power of Motor(KW) | Cleaning Water Pressure | Water Consumption(L/H) | Freaquency Maintenance | Recycle Time(D/H) | |||
Major Motor | Blender Motor | Total Power | Shaft | Moving Rings | ||||
TDL131 | 0.25 | 0.37 | 0.62 | 0.1MPa~0.3MPa | ~20 | 10 Min/Day | 3.4/10000 | 1.7/5000 |
TDL132 | 0.50 | 0.37 | 0.87 | ~40 | 3.4/10000 | 1.7/5000 | ||
TDL201 | 0.37 | 0.37 | 0.74 | ~30 | 3.4/10000 | 1.7/5000 | ||
TDL202 | 0.74 | 0.37 | 1.11 | ~60 | 3.4/10000 | 1.7/5000 | ||
TDL203 | 1.11 | 0.75 | 1.86 | ~90 | 3.4/10000 | 1.7/5000 | ||
TDL301 | 0.75 | 0.37 | 1.12 | ~35 | 10/30000 | 10/3000 | ||
TDL302 | 1.5 | 0.55 | 2.25 | ~70 | 10/30000 | 10/3000 | ||
TDL303 | 2.25 | 0.75 | 3.0 | ~105 | 10/30000 | 10/3000 | ||
TDL351 | 0.75 | 0.55 | 1.3 | ~35 | 10/30000 | 10/3000 | ||
TDL352 | 1.5 | 0.75 | 2.25 | ~70 | 10/30000 | 10/3000 | ||
TDL353 | 2.25 | 1.1 | 3.35 | ~105 | 10/30000 | 10/3000 | ||
TDL401 | 1.1 | 0.75 | 1.85 | ~55 | 10/30000 | 10/3000 | ||
TDL402 | 2.2 | 1.1 | 3.3 | ~110 | 10/30000 | 10/3000 | ||
TDL403 | 3.3 | 1.1 | 4.4 | ~165 | 10/30000 | 10/3000 |
How to Select Right Model?
Q1: How about you sludge treatment capacity per hour?
Q2: What is the thickness of sludge?
Q3: What is the character of your sludge?
Q4: How about you dries sludge?
Q5: How about your water content of sludge cake?
Welcome to visit our company and consulting
Web:en.qhdyshb.com
Tel:+86-335-8592399